CPS SCA Series Скачать руководство пользователя страница 17

Страница: 17 / 164



Grid Adaptability:

IEEE 1547 Interconnect Standard and CPUC Rule

21 applicable; Reactive Power; >0.99 PF (±0.8 adjustable), Selectable

Apparent Power rating enables Full Active Power rating to +/-0.91 PF,

and optional local or remote Active Power Curtailment.



Flexible Communication:

Supports standard CPS Modbus RS485,

SunSpec Modbus, and HTTPS/XML communications via Flex Gateway

to ensure compatibility with 3rd party monitoring and control systems.

The Flex Gateway card enables further command/control as well as

remote firmware upgrades. (Flex Gateway card is optional accessory.

Refer to Flex Gateway manual for further detailed information.)



Wide DC input voltage range:

Operating DC Input Voltage Range:

200-950VDC; Max DC input voltage: 1000VDC.



Long Service Life:

Designed with thin-film capacitors to extend

inverter's service life.



3 MPPTs:

Multi-channel MPPT (Maximum Power Point Tracker) enables

maximum design flexibility and energy harvest optimization over the life

of the system.



Separable Wirebox:

The wirebox enables fused input of either discrete

wiring using the Standard wirebox, SCA50/60KTL-DO/US-480 optional

rapid shutdown wirebox with integrated Sunspec PLC transmitter for use

with APS

、

TS4-F integrated smart modules and APS

、

Tigo TS4-A-F

products, SCA25KTL-DO/US-208 have rapid shutdown wirebox with

integrated Sunspec PLC transmitter for use with APS smart modules

and APS products.



High Protection Degree:

Powder coated aluminum NEMA 4X

enclosure meets the demanding needs of both indoor and outdoor use.



Intelligent Integration:

Integrated DC/AC disconnect switches, and up

to 15 fused string inputs eliminate the need for external DC combiner

Содержание SCA Series





































































































































































Результаты поиска

Содержание SCA Series

Отзывы:

Бренды по названию

Популярные бренды

CPS SCA Series, Инструкция по установке и эксплуатации

Результаты поиска

Содержание SCA Series

Отзывы:

Бренды по названию

Популярные бренды