CPS SC Series Скачать руководство пользователя страница 5

Страница: 5 / 65

Markings on the product

HIGH VOLTAGE:

The product works with high voltages. All work on the product

must only be performed as described in this document.

HOT SURFACE:

The equipment is designed to meet international safety

standards, but surfaces can become hot during operation. Do not

touch the heat sink or peripheral surfaces during or shortly after

operation.

EARTH GROUND:

This symbol marks the location of grounding terminal, which

must be securely connected to the earth through the PE

(protective earthing) cable to ensure operational safety.

DANGER:

Please disconnect the inverter from AC grid and PV modules before

opening the equipment. When the PV array is exposed to light, it

supplies DC voltage to this equipment. Make sure hazardous high

voltage and energy inside the equipment has been discharged.

Do not operate or maintain the inverter until at least 10 minutes after

disconnecting all sources from DC and AC sides.

WARNING:

All the installation and wiring connections should be performed only

by qualified technical personnel. Disconnect the inverter from PV

modules and the Power Grid before maintaining and operating the

equipment.

Содержание SC Series


































































Результаты поиска

Содержание SC Series

Отзывы:

Похожие инструкции для SC Series

Бренды по названию

Популярные бренды

CPS SC Series, Инструкция по установке и эксплуатации

Результаты поиска

Содержание SC Series

Отзывы:

Похожие инструкции для SC Series

Бренды по названию

Популярные бренды