CPS FA1000 SERIES, Руководство по эксплуатации

Страница: 5 / 24

INITIAL EQUIPMENT PREPARATION
Models FA1000, FA1000A and FA1000J
Will come with a 50 lb DOT tank and filter assembly pre-mounted on the
rear of the machine. Please follow the instructions for initial
equipment preparation:
1. Carefully unpack the unit and its contents from its
shipping pallet.
2. Remove the Styrofoam insert from below the tank and cut
the shipping band from around the tank.
3. Ensure all hose connections are firmly hand tight as they may have
come loose during shipping.
The contents of the accessory box are as follows:
1 Power cord
2 R-134a refill hoses, 1/4" SAE and 1/2" ACME
1 1 lb check weight
1 R-134a ID tank label
For the FA1000E the following will be included in the tank accessory
box.
1 Filter, filter bracket, Velcro and tie straps
1 Yellow liquid tank to filter hose
For models FA1000, FA1000A and FA1000J go to page 6.
The following are instructions to mount the filter assembly and filter hose
onto a self provided recover tank for models FA1000E. Place the tank on
the center of the scale (Make sure the tank is free standing).
1. Install the filter bracket on the recovery tank as shown in
Figure - 2a. Secure the filter bracket to the tank collar using the
supplied tie straps. Cut off the excess tie strap after fully
tightening.
2. Secure the filter to the bracket using the supplied Velcro
straps making sure the arrow on the filter is pointing to the
left as illustrated in Figure - 2b.
3. Install the refrigerant tank and filter hoses as shown in Figure - 2c.
Connect the yellow liquid feed hose/hybrid adapter which comes
from the machine to the filter port (a). Connect the yellow tank
liquid hose from the tank liquid port (d) to the filter port (b).
Connect the blue discharge hose coming from the machine to the
vapor port (c) on the tank. Finally connect the ground wire to the
tank as shown in Figure - 2c. If there is not a brass fitting on your
particular tank, any unpainted surface on the tank itself will do.
FIGURE - 2a Filter bracket placed
on tank collar
a
b
FIGURE - 1 Shipping bracket
a
FIGURE - 2b Filter placed on filter bracket
a
a
b
FIGURE - 2c Hose routing between filter,
tank, and unit
a
b
c d
e
5