o
peRaTion
28
BA_v2_colibri_ccTalk_EN_1-0
7
Operation
This chapter describes how to operate the coin validator, i. e. set certain functions on the coin
validator:
•
Selecting a memory block
•
Inhibiting coins/activating narrow coin channel
•
Teaching coin channels in teach mode
•
Selecting Casino mode
The settings which are made directly on the coin validator are described. To find out how to
make the settings using the WinEMP PC configuration software, refer to the separate guide
Chap. 9 What can be set later?, p. 37)
.
The exact function of the settable device options is described in
7.1
Selecting memory block (for double block data-
management only)
If the coin validator is to access the other memory block and accept euro coins instead of national
currency coins, for example, you can choose the correct block using the top switch block:
1
Unhook the coin validator from the machine.
2
For memory block 0, set DIL switch S1.10 downwards (to OFF); for memory block 1, set it
upwards to ON.
3
Remount coin validator in the machine.
4
Switch power off and on again.
The required memory block is activated.
5
Check coin acceptance of the new memory block selected.
Memory block 0 selected
Memory block 1 selected