M
ainTenance
anD
seRvice
BA_v2_colibri_ccTalk_EN_1-0
35
8
Maintenance and service
This chapter describes how to
•
clean the v
2
colibri and
•
remedy the cause of malfunctions.
8.1
Cleaning the coin runway
On their way through the coin validator the coins may leave residues on sensitive parts which
must be removed from time to time to ensure reliable coin acceptance and rejection. Apart from
this, no further maintenance work is required.
• Cleaning interval: As required, at least annually
• Cleaning agent/tool: Compressed air/soft brush/moistened cloth, lukewarm water
Moisten the cloth only slightly to prevent fluid from entering the
device. This would damage the PCB.
Do not use solvents or scouring agents that could affect the plastic and
appearance of the device.
1
Pull the mains plug of the machine.
2
Carefully unfold the flight deck [
] on the left-hand side of the coin insert funnel
and hold it open.
3
Clean the coin runway in the coin validator using compressed air, a soft brush or cloth.
4
Remove dust and coin residues from the validation area using cloth/brush or compressed air.
5
Wipe the two sides of the coin runway clean using a slightly moistened cloth.
6
Allow all parts to dry.
7
Close the flight deck again.
8
Reconnect the machine to the mains supply.
Fig. 12:
Unfolding the flight deck of the coin validator
1
