s
afeTy
insTRucTions
12
BA_v2_colibri_ccTalk_EN_1-0
3
Safety instructions
Before starting up the device for the first time, please read these instructions and in particular
the safety instructions carefully at least once. This is to ensure that you have understood the
contents of this manual and how to operate the coin validator.
3.1
Proper use
The v
2
colibri electronic 3.5“ coin validator with serial ccTalk interface is for use in entertainment,
vending and service machines with a serial ccTalk interface and is intended to check the coins
that are inserted in the machines for specific properties and to either accept or reject them. Use
the coin validator exclusively for this purpose. Under no circumstances can the manufacturer
be held liable for any damage or loss resulting from improper use of the device.
The coin validator has been built in accordance with state-of-the-art standards and the recognized
safety rules. Nevertheless, this equipment can constitute a source of danger. Please observe
therefore the following safety instructions.
3.2
Protecting persons and equipment
The coin validator must only be connected by a trained electrician.
Use the coin validator only in accordance with its proper use. Under no circumstances
can the manufacturer be held liable for any damage or loss resulting from improper
use of the device.
The coin validator PCB is fitted with components which may be damaged beyond repair
by electrostatic discharges. Please observe the handling instructions for components
exposed to the risk of electrostatic discharge.
Select the correct voltage for the coin validator (see label).
Never pull the connecting cable of the coin validator from the machine when a voltage
is applied.
Pull the mains plug of the machine before installing, cleaning or removing the coin
validator.
Please consult Crane Payment Solutions if you intend to make additions or modifications
to the device that go above and beyond the modifications described here.
Keep water and other liquids away from the coin validator.
Please dispose of the device correctly at the end of its service life.
We reserve the right to make technical modifications to the device which are not
covered by these instructions!
