CPI COTI, Техническое руководство

Страница: 141 / 170

Se
ctio
n
1
0 -
Dia
gn
o
sti
c a
n
d
M
ain
te
n
an
ce
Pr
o
ce
d
u
res
Technical Manual
13. Take the new filter head assembly from the service kit.
Holding the new filter assembly as shown, turn the
locking ring anti-clockwise to its open position,
indicated by the two arrows.
Place the filter unit up into the filter holder and turn the
green locking ring clockwise to lock it into place
14. Re-assemble the wiper arm (d) to the filter holder
assembly.
Ensure that the wiper arm is located under the coffee
outlet pipes as shown (e).
11. Ensure the plastic washer (a) if fitted is placed correctly
over the input shaft (long side) as shown.
Re-assemble the front and rear brewer panels to the
central piston chamber/swing arms assembly using the
three retaining screws/locknuts. Check and ensure that
the brewer release lever mechanism operates
correctly.
c
b
12. Re-fit the brewer drive coupling to the input shaft
ensuring that the raised ‘pip’ (b) lines up with its locating
dimple (c) on the input shaft.
Ensure that the captive lock nut is retained in the plastic
drive coupling moulding. Refit the bolt to secure the
brewer drive coupling to the input shaft.
e d
131