Cozzia EC-363C, Руководство по техническому обслуживанию

Страница: 22 / 31

D ：取下销轴，小腿电动推杆可以取下
Pull out plastic bush rings, then the reclining actuator can be disassembled.
E ：倒序换上新的推杆
Proceed in the reverse order of disassembly when assembly.
19.
零重力推杆的拆卸 Disassembly of the zero gravity actuator
A ：插上电源，打开按摩椅。把小腿升到最高位置。
Insert the power cord plug into an electrical outlet, turn the power switch to the “I”
position for idle mode. Then operation the controller to raise the foot rest to the
extreme position.
B ：取掉下前挡板
Remove the bottom part of the front boards.
C
：顺着零重力推杆找到 2 个导线接线端并拆开
Along the connecting wires of the zero gravity actuator to find the 2 connectors, then
disconnect them.
D
：找出推杆
2
端的销轴
Find each end of the actuator is fixing on the U stay fork.
There are two plastic bush rings in the hole.
注意：需要物品支撑小腿部分，避免拔掉销轴瞬间小腿掉落。
Attention: You must use the brace to support the footrest,
avoid the footrest drop suddenly while pulling out plastic bush
rings.
⑤拉出销轴，取下零重力推杆
Pull out plastic bush rings, then the zero gravity actuator
can be disassembled.
⑥ 倒序换上新的推杆
Proceed in the reverse order of disassembly when assembly.
小腿电动推杆
Footrest actuator