Cozzia EC-363C, Руководство по техническому обслуживанию

Страница: 12 / 31

E ：换上新的行程光电，确保其能正常工作，注意位置要让机芯触碰的到
Get a new limit sensor and fix it to the frame then connect the connecter. Test whether the
up limit sensor works fine
， and also we have to adjust limit sensor’s position make sure the
mechanism can not hit it.
6. 揉捏的拆卸： Disassembly
kneading motor
A ：参考靠背后盖的更换方法取下靠背后盖。
Refer to the Disassembly of the rear cover of the backrest
to take of the rear cover.
B ：取下揉捏皮带
Take off the kneading belt.
C ：剪掉扎带，可以找到揉捏电机接线上的压线帽。
Cut the cable ties and peel the tube ， then find the socket of jacks
of the kneading motor.
D ：将压线帽取下，即可将揉捏电机连接线断开。
Take the socket of jacks and disconnect the wire of kneading motor.
E ：松卸揉捏电机上的 4 个螺丝
Take off the screws and then we can take the kneading motor away
Kneading belt has been taken off
The socket of jacks
Make sure this part can not hit the up
stroke limit sensor
揉捏电机上的 4 枚螺丝
the 4 screws of the kneading
motor