St
ep 4
.
Align the left and right buckle
tongues to one tongue and insert into
the buckle until you hear a
“
Click”(D13).
St
ep
5:
Pull the shoulder straps upwards to
remove the slack from the lap sections of
the harness then pull the adjuster strap
until the harness is fully tightened(D13).
D13
CLICK
11.3
. Installing in safety group II
This is suitable for children of weight
15-25kg, 3-7 years approximately.
St
ep 2
:
Locate the Ezfix connec�on points
in the vehicle.
St
ep 1
:
Press both button and push out
the Ezfix connector
c1. Install t
he b
aby ca
r se
at
E2
E1
Installa�on: Ezfix+top tether
+3-point safety belt
S
e
cu
ri
ng
t
he
c
hi
ld
:
5
-
point
harness
21
E3
CLICK
PUSH
St
ep
3:
Push child seat following the
direc�on illustrated, un�l the Ezfix
connectors are completely locked with the
connec�on points of the vehicle (E3)
St
ep
4:
Check to ensure that the Ezfix locking
system turns to green and make sure child
seat is firmly connected(E4).
E5
St
ep 5
:
Press the adjusting button
and adjust the belt of top tether to the
longest(E5).
NOTICE:
Child safety seat must be firmly
against the vehicle seat.
PUSH
E4
22