12
. Installing in safety group II, III
This is suitable for children of weight 15-36kg, 4-12 years approximately.
Group II,III installa�on can choose to use EZFIX or not.
1.Using EZFIX:
Connect EZFIX with anchorage
point on the vehicle seat(F1)
2.Not using EZFIX
Hide EZFIX in the booster. Put the
seat against the car seat(F2)
PUSH
CLICK
PUSH
F1
F2
St
ep 4
.
Align the left and right buckle
tongues to one tongue and insert into
the buckle until you hear a
“
Click”(E18).
St
ep
5:
Pull the shoulder straps upwards to
remove the slack from the lap sections of
the harness then pull the adjuster strap
until the harness is fully tightened(E18).
E18
CLICK
27
28
St
ep 2
:
Follow the F5 routine to install the
child car seat.
When not using the child car seat,
ensure that it is kept in a safe place. When the
child car seat is in the car but not being used
please ensure that it is firmly installed.
N
o
t
i
c
e 4
:
Securing the child
St
ep 1
:
Follow the part 14 (see
picture H1~H9)routine to remove
car seat pad.
A
C
B
F3
F5
NOTICE 3:
No need to take off the top tether.
.
Put the top tether in the bag(F4)
NOTICE 1:
Fold the strap of both
sides and hide under the booster
cover
NOTICE 2:
Place the buckle in the
booster(under the cover).
F4
