18
Using the Side Burners Built-In Ignition System:
1.
Open the canopy.
2.
Keep your body, arms and face as far away from the burners and cooking surface as possible.
3.
Select the burner that you want to ignite. Depress and rotate the knob corresponding to that burner
counter-clockwise to the "High" position.
a.
As you are nearing the "High" position, you will notice the valve getting tougher to turn. This is the
spring inside the valve building up energy to create the spark. Once you hear a click, the igniter has
fired the spark for that burner.
b.
Do not turn the knob too fast, as you need the gas to travel into your manifold, then to your valve
and finally into the burner where it will meet the spark from the igniter (at the front of the burner).
Conversely, if you turn the knob too slowly, you can cause a build-up of gas in the side burner and
create a large flash when it ignites.
4.
If the burner does not ignite on the first attempt, try again immediately but be very aware of any gas building
up inside the side burner.
a.
If the side burner does light after three consecutive attempts, turn
the knob to the "Off" position, keep the canopy open, and allow the side burner to clear of any built
up gas for at least 5 minutes before starting the process again.
5.
If at this point the side burner will still not ignite, contact Coyote Customer Service for further assistance to
troubleshoot your side burner.
Lighting Instructions for your Side Burner
Содержание C1PB
Страница 27: ...26 C1PB Parts List...
