COVVI HAND, Техническое руководство

Страница: 58 / 83

00 | Page 58 www.covvi.com | Unit 4, Quayside Business Park, Leeds, LS10 1DJ | 020 3949 9500
11.9 Grip Tables
Swipe left to populate the Grip Tables. You can
populate up to four tables with up to six grips in
each. Tables B, C and D can be empty, but Table
A must contain at least one grip, so the hand
always has a grip to go into. This grip is called
the primary grip.
For new users, its recommendable to start with
one or two grips in either one or two tables. For
advanced users, all the tables can be populated
with grips for daily activities, for example one
table for grips used at home, another for grips
used when at work.
If the hand is to be used with a COAPT system,
remove all grips from the tables except the primary
grip and assign all grip switch triggers to trigger
off. The setup can then be done within the COAPT
software.
11.0 COVVI Go App
Dual Site Open/Close:
This is the most common operating mode used with the COVVI Hand. It has two input
sites, the default setup is Input A for an open signal and Input B for a close signal. All
grip switch triggers work in this mode and give the user the most flexibility.
If your patient has dual site control, independent signals open and close the hand. There is one method available.