Fig.A1
Fig.A2
Fig.A3
The different water slide has different quantity of sprinklers, thus, there are serial
numbers on each one to match the product. No.1 will match No.1, and No.2 will
match No.2. After confirming the position of each sprinkler,please wrap the water
pipe along with the hook and loop fastener.
NOTE
: IT IS NORMAL TO HEAR AND FEEL A FAIR AMOUNT OF AIR ESCAPING FROM THE
SEAM LINES. IT IS NORMAL TO SEE SOME WATER SEEPING OUT AROUND THE SEAM LINES
OF THE POOL.
WATER PIPE SETUP INSTRUCTION
NOTE: ONLY FOR THE BOUNCER WITH WATERSLIDE AND SPRAY FUNC TION.
1
1
1
1
1
1
1
2
1
1
1
08
● Attach the water tube provided along the side of the slide using the hook and
loop straps (Fig. A2 and A3).
● Connect water supply with a regular garden hose with the provided water
tube. The 2-part adaptor of the water tube will fit most garden hoses. Unscrew
the 2-part adaptor to find the right fitting for your hose.
● Attach the sprinkler heads to the arch above the slide and water cannon with
the hook and loop attachment (Fig A1) as shown in the diagram below.
●Turn on the water faucet to the garden hose. Note: Increase the water
pressure gradually until water spraying from the sprinklers reaches the desired
power.
● For wet use, fill the pool with at least 20 cm/8 inch of water before playing.
Water should be added regularly to maintain the water level in the pool.
EN
