REPAIR
07
In case of any breakage of product
，
please patch up through hand sewing.
Each type of product is provided with a repair kit which includes six pieces of
cloth( two pieces for each color ). Threads and sewing needles are not provided
and you should purchase by yourself (3# sewing needle is suggested).
• Turn off the air blower and deflate the product.
• Thread a needle with a spare thread and tie a knot at its end.
• Close up the broken cloth and sew along the gap. Tie a knot after sewing to
avoid the loose thread.
In case of cloth breakage(as shown in picture M ). please cover the breakage
with a piece of patching cloth of proper size. Then sew up the patching cloth
along its sides.
While repairing, you should take notice that the sewing should only occur on
the surface layer of the original cloth rather than reaching its underlayer.
• In case of breakage in the seam position (as shown in picture N), the sewing
should only occur between the two split cloths rather than reaching the
underlayer or any other cloth.
• In case of large-size breakage or internal structural damage, please change
the product or have professionals do the repairing. Air leakage is normal in the
repaired position and the air pressure of the repaired product may be lower
than the original. But it will not affect the normal use of the product.
• Patching in one position more than twice is not suggested.
• Needles should be taken good care of and not be left on the product after
sewing.
• It is suggested that persons with sewing techniques should do the repairing
work.
EN
