16
Contera Outdoor Dome | Installation Manual
Pole Mount
For a pole mount installation, the AV-WMJB-W wall mount, AV-PMA pole mount, and MD-CAP-W
mount cap are required (sold separately). A pole mount should only be attached onto hard ceilings
including wood, plastic, metal, and concrete.
1.
Using the Mounting template, prepare the mounting provisions for the camera installation.
2.
Connect the wall mount cap and wall mount.
3.
Attach the Junction Box Adapter to the Pole Mount Adapter.
4.
Remove the conduit plug on the junction box adapter and connect ¾” NPT conduit to the junction
box adapter.
NOTE: Use silicon or water pipe seal tape to make sure no water leakage between conduit
pipe and junction box adapter.
5.
Run the Ethernet cable and outside power cable (if necessary) through the Junction Box Adapter.
Ensure the gasket is seated properly.
6.
Attach the Wall Mount Adapter (AV-WMJB-W) to the Pole Mount Adapter (AV-PMA) .
Reference #
Description
1
Remove conduit plug
2
Connect ¾” NPT conduit to junction box adapter
(ensure use of water seal tape)
Содержание ARECONT VISION CONTERA
Страница 35: ...35 Contera Outdoor Dome Installation Manual ...
Страница 55: ...165mm 165mm Mounting Template E E E E ...