Costar ARECONT VISION CONTERA, Руководство по установке

Страница: 18 / 55

18
Contera Outdoor Dome | Installation Manual
Corner Mount
For a corner mount installation, the AV-WMJB-W wall mount, AV-CRMA corner mount, and MD-CAP-W
mount cap are required (sold separately). A corner mount should only be attached onto hard corner surfaces
including wood, plastic, metal, and concrete.
1. Using the Mounting template, prepare the mounting provisions for the camera installation.
2. Connect the wall mount cap and wall mount.
3. Attach the Junction Box Adapter to the Corner Mount Adapter.
4. Remove the conduit plug on the junction box adapter and connect ¾” NPT conduit to the junction
box adapter.
NOTE: Use silicon or water pipe seal tape to make sure no water leakage between conduit
pipe and junction box adapter.
5. Run the Ethernet cable and outside power cable (if necessary) through the Junction Box Adapter.
Ensure the gasket is seated properly.
6. Attach the Wall Mount Adapter (AV-WMJB-W) to the Corner Mount Adapter (AV-CRMA).
Reference # Description
1 Remove conduit plug
2 Connect ¾” NPT conduit to junction box adapter
(ensure use of water seal tape)