Costar ARECONT VISION CONTERA, Руководство по установке

Страница: 11 / 55

11
Contera Outdoor Dome | Installation Manual
NOTE: When mounting the camera outdoors or in a wet environment, use of supplied grommet is
recommended. Ensure the grommet is properly seated flush with the camera housing.
7. Align the hole on the camera with the hole on mounting plate, and install the grommet on camera
housing.
NOTE: If using the side connection of the NPT port, you need to install the supplied grommet
without a through hole on the camera housing, and remove the cap covering the side entrance,
otherwise; leave the cap in place. If using the NPT port, always use Teflon tape around the threads
to ensure proper sealing. The conduit fits ¾” NPT standard. Ensure NPT port is facing downward.
8. Fasten securely four captive screws.
9. Attach the Dome Cover to the Contera
®
Outdoor Dome camera and fasten securely four captive
screws.
10. To configure the camera, reference the camera discovery, set-up and configuration section.
CAUTION!
The captive screws must be used to properly secure the dome cover and camera housing. Failure to use the
captive fastener may result in serious injury. When mounting the dome cover to the camera housing, ensure
that the gasket is properly seated and not folded. Failure to do so may result in water and dust ingress.
Water damage from improper installation is not covered by the warranty!