14
Contera Outdoor Dome | Installation Manual
Pendant Mount
For a proper pendant mount installation, the AV-PMJB pendant mount and MD-CAP-W mounting cap are
required (sold separately). A pendant mount should only be attached onto hard ceilings including wood,
plastic, metal, and concrete.
1.
Using the Mounting template, prepare the mounting provisions for the camera installation.
2.
Connect the cap, pendant pole and mount together.
NOTE: The thread size for Top shield, pendant pole and mount is 1.5” NPT.
3.
Attach the pendant mount to the ceiling using the four wood screws provided or any optional
hardware suitable for the mounting surface.
4.
Run the Ethernet Cable and outside power cable (if necessary) through the supplied rubber gasket
and then through the wall mount. Ensure the gasket is seated properly.
5.
Attach the mounting plate to the MD-CAP-W with the supplied screws.
6.
Prepare the network cable with the supplied grommet and insertion tool.
NOTE: When mounting the camera outdoors or in a wet environment, use of supplied grommet is
recommended. Ensure the grommet is properly seated flush with the camera housing.
Содержание ARECONT VISION CONTERA
Страница 35: ...35 Contera Outdoor Dome Installation Manual ...
Страница 55: ...165mm 165mm Mounting Template E E E E ...