Cosmos XPS-7, Инструкция по эксплуатации

Страница: 4 / 16

2 3
4 Component Names and Functions
No Name Function
①
Power lamp (green) Flashes during the warm up period after the power is turned
ON and remains lit during operation.
②
Trouble lamp (yellow) Flashes when an error occurs.
③
Alarm lamp (red) Flashes when the detected gas concentration reaches the
alarm point.
④
LCD display Indicates gas concentration and other information.
⑤
Key switch cover Lightly pull the cover toward you to open it and access the key
switches.
⑥
Buzzer speaker
⑦
Gas inlet Sampled gas aspiration inlet. (6 dia.) Attaches to the gas inlet
tube.
⑧
Gas outlet Exhaust outlet for sampled gas (6 dia.)
⑨
Adapter connector Connects to the 100-VAC/6-VDC adapter plug.
⑩
Battery cover Lift the snap lock and open the cover to insert batteries.
⑪
Sensor cover Lift the snap lock and open the cover to insert the sensor unit.
⑫
Sensor window Used to check the sensor unit that is installed.
⑬
LED (red)
(Battery check)
Lit if the key switch cover is open with the Gas Detector turned
OFF, when batteries are inserted, or when batteries are low.
Main Unit
③
②
①
④ ⑤ ⑥
⑪
⑫
⑩
⑨
⑦
⑧
⑬
2 3
● Observe the following precautions for the storage environment and method
of storing the Gas Detector.
WARNING
：
Do not store the Gas Detector for long periods in locations with high temperatures or
high humidity. Otherwise, the performance of the Detector may be impaired.
CAUTION
：
Do not subject the Gas Detector to sudden changes in temperature or humidity.
Otherwise, the performance of the Detector may be impaired.
CAUTION
：
If the Gas Detector is not to be used for a long time, remove the batteries before
storing it.
2 Contents of This Package
The following components are included with the Gas Detector. Ensure that all components are
present before attempting to use the Detector.
□ Gas Detector …………………………… 1 □ Filters …………………………………… 2
□ Shoulder strap ………………………… 1 □ AA alkaline batteries…………………… 4
□ Gas inlet tube…………………………… 1 □ Inspection results……………………… 1
□
Instruction manual……………………… 1
3 Sensor Units
Model Detected gases FS
Alarm setting
1st level 2nd level
XDS-7NH NH
3
Ammonia 100 ppm 12 ppm 25 ppm
XDS-7SH SiH
4
Silane 25 ppm 2.5 ppm 5 ppm
XDS-7DC SiH
2
Cl
2
Dichlorosilane 25 ppm 2.5 ppm 5 ppm
XDS-7AH AsH
3
Arsine 250 ppb 25 ppb 50 ppb
XDS-7PH PH
3
Phosphine 1 ppm 0.15 ppm 0.3 ppm
XDS-7BH B
2
H
6
Diborane 500 ppb 50 ppb 100 ppb
XDS-7SE H
2
Se Hydrogen selenide 250 ppb 25 ppb 50 ppb
XDS7GH GeH
4
Germane 1 ppm 0.1 ppm 0.2 ppm
XDS-7CL Cl
2
Chlorine 5 ppm 0.25 ppm 0.5 ppm
XDS-7CF ClF
3
Chlorine trifluoride 1 ppm 0.05 ppm 0.1 ppm
XDS-7HC HCl Hydrogen chloride 25 ppm 2.5 ppm 5 ppm
XDS-7HF HF Hydrogen fluoride 10 ppm 1.5 ppm 3 ppm
XDS-7HB HBr Hydrogen bromide 10 ppm 1.5 ppm 3 ppm
XDS-7NO NO Nitrogen monoxide 100 ppm 12 ppm 25 ppm
XDS-7HS H
2
S Hydrogen sulfide 50 ppm 5 ppm 10 ppm
XDS-7CO CO Carbon monoxide 250 ppm 12.5 ppm 25 ppm
XDS-7DS Si
2
H
6
Disilane 25 ppm 2.5 ppm 5 ppm
XDS-7F2 F
2
Fluorine 5 ppm 0.5 ppm 1 ppm
XDS-7OZ O
3
Ozone 1 ppm 0.05 ppm 0.1 ppm
Contact an authorized representative of New Cosmos regarding other detectable gases not listed in the
table.