COSMOGAS ECOTWIN, Инструкция по установке, эксплуатации и обслуживанию

Страница: 60 / 88

60
COSMOGAS
Ecotwin
8.2.9 - WORKING MODE
The menu consists of several pages and, by scrolling with the
arrows, it is possible to consult and modify all the parameters
relating to the settings:
Parameter
Permission
level
U.M. Range Factory setting
Costum
value
Sanitary hot water
(Enabling or disabling of the DHW function)
Installer /
Selected -
Not selected
Selected
Heating
(Enabling or disabling of the heating function)
Installer /
Selected -
Not selected
Selected
Cooling
(Enabling or disabling of the cooling function)
Installer /
Selected -
Not selected
Not selected
Basic operation mode
(Don’t change)
Installer /
Selected -
Not selected
Not selected
Max duration for min compressor speed Installer Min 5...60 5
Heating / cooling switch Installer /
- OFF,
- Outdoor temp. (parameter in-
tervention threshold “Outdo-
or temp. to start heating”
and “Outdoor temp. to start
cooling”),
- External signal control (details
“17” and “18” of Figure 6-22),
- External signal control +
outdoor temp. (combination
of the previous two options).
OFF
Outdoor temp. to start heating
(Upon reaching this value, the machine waits an hour before
restarting).
End user °C -10...25 18
Outdoor temp. to start cooling
(Upon reaching this value, the machine waits an hour before
restarting).
End user °C 20...-53 25
8 - USE
Figura 8-16 - Working mode icon