COSMOGAS ECOTWIN, Инструкция по установке, эксплуатации и обслуживанию

Страница: 29 / 88

29
ecotwin
COSMOGAS
6 - INSTALLATION
6.8.2 - STM outdoor unit condensate
drain installation
The machine is designed for conveying and discharging the
condensate that forms on the battery. To do this, insert the
condensate drain fitting in the desired hole (Figure 6-8).

Mount the drainage fitting in “A” position and seal it with
silicone, as shown in Figure 6-8.

Incline the machine by 1 cm / m in the direction of the
drainage fitting (A) to facilitate the evacuation of the
collected water.

During installation, tilt the condensate collection pipe by
1 cm / m to facilitate the drainage of rainwater.

Convey the condensate drain connection to a suitable
drain with siphon (see Figure 6-9).
Figure 6-8 - Mounting the drainage fitting
A
020031.01.003
6.8.1 - Mounting the appliance
Observe the following instructions during installation (Figure
6-7):
- Install the appliance on a concrete floor or masonry blocks
or a metal bracket;
- If use a metal bracket, it must ensure a support weight of at
least 5 times that of the appliance;
- The bracket can be made of galvanized steel, aluminum or
other materials that do not degrade over time;
- In the case of wall mounting, choose a support suitable for
the weight of the appliance;
Figure 6-7 - Installation on a raised floor
A - Drain with siphon
B - Condensate drain connection
Figure 6-9 - Condensate drain connection