COSMOGAS ECOTWIN, Инструкция по установке, эксплуатации и обслуживанию

Страница: 34 / 88

34
COSMOGAS
Ecotwin
6 - INSTALLATION
6.15 - Installation of the safety kit in the
GS indoor unit
The safety kit is supplied from the factory in the accessories
bag (section 2.2). Mount the safety kit as follows:
1.- Install the safety kit on the fitting located on the upper side
of the indoor unit (Figure 6-12);
2.- Connect the drain pipe to the safety valve outlet (Figure
6-13);
3.- Through the existing holes in the upper part, let the drain
pipe enter the indoor unit and let it out again through the
hole in the lower part of the appliance (Figure 6-12).
Figure 6-12 - Safety kit installation
Figure 6-13 - Connection of the drain pipe to the safety valve
Safety valve
outlet
Drain pipe
Inlet
Drain pipe
Outlet