11
LOCATION REQUIREMENTS
IMPORTANT:
Observe all governing codes and ordinances. Do not obstruct
flow of combustion and ventilation air.
•
This cooktop is for indoor household use only.
•
It is the installer's responsibility to comply with installation clearances
specified on the model/serial rating plate. The model/serial rating plate is
located on the underside of the cooktop base.
•
The cooktop should be installed in a location away from strong draft areas,
such as windows, doors, and strong heating vents or fans.
•
Recessed installations must provide complete enclosure of the sides and
rear of the cooktop.
•
All openings in the wall or floor where cooktop is to be installed must be
sealed.
•
Do not seal the cooktop to the side cabinets.
•
Cabinet opening dimensions that are shown must be used. Given
dimensions are minimum clearances.
•
Grounded electrical supply is required. See "Electrical Requirements"
section.
•
Proper gas supply connection must be available. See "Gas Supply
Requirements" section.
•
The gas and electric supply should be accessible without requiring removal
of the cooktop.
IMPORTANT:
To avoid damage, check with your builder or cabinet supplier to
make sure that the materials used will not discolor, delaminate or sustain
other damages.
Mobile Home - Additional Installation Requirements
•
The installation of this cooktop must conform to the Manufactured Home
Construction and Safety Standard, Title 24 CFR, Part 3280 (formerly the
Federal Standard for Mobile Home Construction and Safety, Title 24, HUD
Part 280). When such standard is not applicable, use the Standard for
Manufactured Home Installations, ANSI A225.1/NFPA 501A or with local
codes.
In Canada, the installation of this cooktop must conform with the current
standards CAN/CSA-Z240-latest edition, or with local codes.
