32
Back cover
Convert Griddle (On Models with Griddle)
1.
Remove the screws on the back cover, and remove the back cover.
4.
Use a wrench to remove the natural gas orifice and replace it with the
appropriate LP orifice. (See orifice chart.) Be cautious not to bend or
damage the gas line with excessive force when working with the wrench.
5.
Replace the orifice holder and the back cover.
Complete Gas Conversion
1.
Open shutoff valve in the gas supply line.
2.
Plug in cooktop or reconnect power.
•
Refer to "Gas Connection" section in the "Installation Instructions" section
for proper connection of the cooktop to the gas supply.
•
Refer to "Complete Connection" section to complete this procedure.
•
Refer to the "Adjust Flame Height" section for burner flame adjustments.
IMPORTANT:
You may have to adjust the low setting for each cooktop
burner.
2 .
Remove the screws on the back of the orifice holder below the griddle.
Orifice
3.
Gently pull out the orifice holder unveiling the natural gas orifice.
Orifice
holder
