CEB-V850ES/FJ3·SJ3 Evaluation Board HardwareUser’s Manual
13
(5) About
JPX5-JPX10
Although the pattern connects between 1-2 and between 3-4 of JPX5-JPX8, and between 1-2 of JPX6,
JPX9, JPX10, a signal is separable by cutting the pattern on the back side (soldering side) of each jumper.
As standard, the following jumper is un-mounting.
The installation part of each jumper is shown below.
JPX Function
JPX5
LIN0 ( Between CPU - LIN transceiver )
JPX6
LIN0 ( Between CPU – LIN transceiver NSLP )
JPX7
LIN0 ( Between LIN transceiver – LIN connector )
JPX8
LIN1 ( Between CPU – LIN transceiver )
JPX9
LIN1 ( Between CPU – LIN transceiver NSLP )
JPX10
LIN1 ( Between LIN transceiver – LIN connector )
Table 3.3.3 (5)
4 2
JPX5,8
3 1
JPX6,7,9,10
1 2
