CEB-V850ES/FJ3·SJ3 Evaluation Board HardwareUser’s Manual
8
(2) CAN-I/F connector (CN1, CN2)
In the case of CEB-V850 ES/FJ3, CAN0 is assigned to CN1 and CAN1 is assigned to CN2, respectively.
In the case of CEB-V850 ES/SJ3, CAN1 is assigned to CN1 and CAN0 is assigned to CN2, respectively.
Since the connector on a substrate mounts Dsub9 pin (female), the connector by the side of a cable should
use Dsub9 pin (male) at the time of cable creation.
Pin distribution table is shown below.
CAN I/F connector pin distribution table
Pin
№
CN1(CAN0:FJ3 CAN1:SJ3)
CN2(CAN1:FJ3 CAN0:SJ3)
1 N.C.
N.C.
2 CAN_L0(FJ3)
CAN_L1(SJ3)
CAN_L1(FJ3) CAN_L0(SJ3)
3 GND
GND
4 N.C.
N.C.
5
Coupling with capacitor and fed to GND.
Coupling with capacitor and fed to GND.
6 N.C.
N.C.
7
CAN_H0(FJ3) CAN_H1(SJ3)
CAN_H1(FJ3) CAN_H0(SJ3)
8 N.C.
N.C.
9 N.C.
N.C.
Table 3.3.2 (2)
Loading connector part number : XM3B-0922-112 (OMRON Corp.)
