Cosen SH-3026L, Инструкция по эксплуатации

Страница: 37 / 106

4 ‐ 5
Control Buttons
1. Power indicator lamp
When the lamp is on, it indicates the power to the machine is turned on.
2. Hydraulic start button (with built ‐ in lamp)
Press this button to start the hydraulic motor. (The button lights up when pressed.)
To stop the hydraulic motor, press emergency stop button .
3. Emergency stop button
Press this button to stop the machine in an emergency. When the button is pressed, it brings the
machine to a full stop. The button locks when pressed. In order to unlock it, please turn the button
clockwise.
4. Blade speed indicator
Blade speed is shown here.
Please do not adjust parameters. If there is any question regarding the indicator, please contact
the local agent.
5. Saw blade start button (with built ‐ in lamp)
Press this button to start the blade drive motor. (The button lights up when pressed.)
If the vise is not clamped, saw blade cannot start.
When saw blade is running, the coolant pump will start automatically.
6. Saw bow up button
When this button is pressed for more than 3 seconds, the saw bow rises automatically until the saw
bow touches the upper limit switch. When this button is pressed for less than 3 seconds, the saw bow
rises until the operator lets go of the button.
While pressing the saw bow up button can stop the running blade, please still make use of the
emergency stop button in an emergency.
7. Saw bow down button
When this button is pressed, the saw bow descends.
8. Blade speed control knob