Cosen SH-3026L, Инструкция по эксплуатации

Страница: 47 / 106

4 ‐ 15
Before you start cutting, check again that there is no other object in the cutting area.
Step 8 – While the blade descends, adjust the blade speed if necessary. You can do so by turning the
blade speed control knob, clockwise to speed up and counterclockwise to slow down. The blade
speed is displayed in the blade speed indicator.
Step 9 – Select the proper cutting condition according to different material.
Step 10 – After the entire cutting job is completed, elevate the saw bow to the top and open the
vises to remove the workpiece.
Step 11 – Clean the workbed by removing chips and cutting fluids.
Step 12 – Lower the saw bow to a proper position then turn off the power.
TERMINATING A CUTTING OPERATION
STOP

To terminate a cutting operation, press either the saw bow up button or the emergency stop
button.

The saw blade will stop running when the saw bow up button is pressed.

Both the saw blade and hydraulic pump motors will stop running when the emergency stop
button is pressed.

The machine will stop automatically when an error occurs.