manualshive.com logo in svg

CORRECT CRAFT Ski Nautique, Руководство пользователя

Поделиться
Скачать
CORRECT CRAFT Ski Nautique Скачать руководство пользователя страница 72

Service For Your PCM Engine 

Your PCM engine was manufactured by PCM from the finest materials
available and distributed through your Correct Craft dealer who is in the best
position to provide you with proper service. Your Correct Craft dealer is your
direct contact with PCM authorized service. Your dealer has the necessary
tools and training to properly handle your normal service requirements as well
as supply you with the parts, service and information you may require.

If your Correct Craft dealer is unable to provide you with the parts, service or
information you require, they will contact PCM directly on your behalf. The
PCM Service Department depends on specific and accurate information in
order to aid your dealer to respond to your service and parts needs. Your dealer
has been trained to provide this information.

PCM facilities are dedicated to the manufacturing and distributing of the finest
marine engines available. PCM does not repair engines or engine components
at their locations.

If you are anticipating a trip to an area where you are not aware of the location
of a PCM servicing dealer, contact PCM customer service department prior to
leaving for the location of a PCM dealer where you may be traveling. 
For service and/or parts literature, contact your Correct Craft dealer or:

PCM
P.O. Drawer 369
Little Mountain, SC 29075

Service Information Request 

When you contact your dealer or PCM for service or parts information, please
include the following:

• Your name, address and phone number.
• Engine and transmission serial and model numbers.
• Date purchased.
• Name of selling or servicing dealer.
• Hull number.
• Number of hours on the hour meter.
• Date of previous correspondence.
• All other pertinent information necessary to allow them to respond properly.

Engine / Transmission Identification

The engine model number and serial number is in different locations, but can
be found on one of these locations:
• On a plate bolted to the intake manifold.

8.2

Ski 10.qxd  9/1/00  2:43 PM  Page 8.2

Содержание Ski Nautique

























































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды