manualshive.com logo in svg

CORRECT CRAFT Ski Nautique, Руководство пользователя

Поделиться
Скачать
CORRECT CRAFT Ski Nautique Скачать руководство пользователя страница 39

Transom Warning

Dash Warning

DANGER

Contact with a spinning propeller or excessive carbon monoxide exposure can cause
injury or death.  Shut off engine if persons are getting in or out of boat, near propeller
or on boarding platform.  Do not operate this boat without a Correct Craft Inc. boarding
platform secured in place or excessive carbon monoxide exposure may occur.

WARNING

Gasoline vapors can explode resulting in injury or death.  Before engine startup, check
engine compartment for gasoline vapors then run blower for four minutes.  Run blower
when below cruising speed.

Side Console Warning

Avoid personal injury

Never run engine when the operator is not seated facing forward with hands on the
controls.  Leaking fuel is a fire and explosion hazard; inspect fuel system regularly and
fix leaks immediately.  Do not sit on seat backs, boat sides or engine box  while engine
is running.  Do not make high-speed maneuvers in this boat.  Do not stand on boat sides
at anytime.  To insure safe use and maintenance of this boat, read and understand the
owners manual thoroughly.  If you do not have a manual, contact:  Correct Craft Inc.
6100 S. Orange Avenue  Orlando FL  32809  (407) 855 - 4141  [email protected]

Avoid personal injury

Always test the emergency engine shut off switch for proper function before operating
the boat and never operate the boat unless the lanyard is securely attached to the driver.

3.3

Ski 10.qxd  9/1/00  2:43 PM  Page 3.3

Содержание Ski Nautique

























































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды