manualshive.com logo in svg

CORRECT CRAFT Ski Nautique, Руководство пользователя

Поделиться
Скачать
CORRECT CRAFT Ski Nautique Скачать руководство пользователя страница 1

i

Dear Correct Craft Owner:

Congratulations on your purchase of a Ski Nautique. You have chosen a boat
that is unequaled “on the waters of the world” for water-skiing.

Since 1925, we have manufactured some of the finest products boat builders
can produce.

Your boat was manufactured with the latest marine technology and materials.
You have bought into a legacy handed down by W. C. Meloon over 76 years
ago. His dedication to building boats to the glory of God remains true today as
the cornerstone of our commitment in bringing to you the finest in water sports
boats.  We continue to lead this industry in technology and design innovation.
Our heritage is a source of pride.  Years of experience, including that of four
generations of Meloons have gone into the building of your boat.   We hope
that you will enjoy it to the fullest.

Take a moment to review this owners manual for your boat. We have
assembled this manual to inform you about your boat and educate you further
on boating. There are many tips and tricks on care and maintenance sprinkled
throughout the manual, along with some cautions that will apply to your boat.
Boating is very important to us and we would like you to enjoy many years of
boating in your boat.

Welcome into the Nautique family.

Sincerely,

Walter N. Meloon
President/Chief Executive Officer

Trust in the Lord with all thine heart; 
and lean not unto thine own understanding. 
In all thy ways acknowledge him, 
and he shall direct thy paths.
Proverbs 3: 5-6

Ski 10.qxd  9/1/00  2:41 PM  Page i

Содержание Ski Nautique

























































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды