CORRECT CRAFT 100077 Скачать руководство пользователя страница 99

Страница: 99 / 228

4-27

Controls and Indicators

Keel Offset

Adjust depth sounder to measure depth below keel or drive instead
of sensor.

The display will show “K X.X” which is the current setting for the
keel offset. Pressing

and

will change the keel-offset setting.

Holding

in for two seconds will save the new keel offset setting

and change the display back to the normal depth mode. The keel
offset is normally a negative number.

Units

Change the unit of measure.

This display will show “UNIT FT” for feet (default), “UNIT FA” for
fathoms, or “UNIT M” for meters. Pressing

and

will cycle

through the choices. Pressing and holding the

will save the units

shown in the display and change the display back to the normal
depth mode.

Keel Display

CORC124

D-Drive Sec 4_2010:Nautique Ski Sec 4.qxd 7/23/09 4:38 PM Page 27

Содержание 100077





































































































































































































































Результаты поиска

Содержание 100077

Отзывы:

CORRECT CRAFT 100077, Руководство пользователя, Страница: 99 / 228

Результаты поиска

Содержание 100077

Отзывы: