manualshive.com logo in svg

CORRECT CRAFT 100077, Руководство пользователя, Страница: 178 / 228

Поделиться
Скачать
CORRECT CRAFT 100077 Скачать руководство пользователя страница 178

7-2

Maneuvering Techniques

Steering response depends on three factors: rudder position,
motion and throttle.

Maneuvering in congested areas and advanced courses requires
mastering and good “Rules of the Road” ethics. Your Nautique boat
is designed to be responsive and agile enough to meet the
challenge of these conditions.

Maneuvering

High speed maneuvering is relatively easy and takes little practice
to learn. Slow speed maneuvering is far more difficult and requires
time and practice to master.

When making tight maneuvers, it is important to understand the
effects of turning. Since both thrust and steering are at the stern of
the boat, the stern will push away from the direction of the turn.
The bow follows a smaller turning circle than the stern.

CORC135

BOW

CIRCLE

STERN

CIRCLE

Section 7

Quick maneuvers can cause people and

objects in the boat to be thrown about resulting in death
or serious injury. DO NOT make quick or high-speed
maneuvers when you or your passengers are not
prepared.

!

D-Drive Sec 7_2010:Nautique Ski Sec 7.qxd  7/23/09  4:47 PM  Page 7-2

Содержание 100077





































































































































































































































Отзывы:

Нет отзывов