manualshive.com logo in svg

CORRECT CRAFT 100077, Руководство пользователя, Страница: 106 / 228

Поделиться
Скачать
CORRECT CRAFT 100077 Скачать руководство пользователя страница 106

4-34

Section 4

NOTICE

If either or both of the two light functions are on, the indicator
light will illuminate and a press and release will turn off any of
the lights that are on.

Navigation/Anchor Lights

A quick press and release of this button turns on the navigation
lights, and the indicator light for this button will illuminate. A press
and slight hold will only turn on the anchor light and cause the
indicator light to flash. A press and release of the key turns off both
of the lights.

Bilge Pump

The bilge pump turns on or off by pressing and releasing the
button. The indicator light for this key will illuminate when the
pump is on.

Engine Compartment/Bilge Area Blower

The bilge area and engine compartment blower is turned on or off
by pressing and releasing the button. The indicator light for this
key will illuminate when the blower is on.

Horn

The horn button is a momentary switch. The horn will operate
whenever the button is pressed and will stop when the button is
released.

D-Drive Sec 4_2010:Nautique Ski Sec 4.qxd  7/23/09  4:38 PM  Page 34

Содержание 100077





































































































































































































































Отзывы:

Нет отзывов