CORRECT CRAFT 100077 Скачать руководство пользователя страница 213

Страница: 213 / 228

10-9

Long Trips

DO NOT use your boat and trailer to haul excessive gear.

Each time you stop on a long trip, check the following:

• Make sure the wheel lug nuts are tight and the bearings are

lubricated.

• Make sure the boat is still positioned snugly against the bow

stops.

• Examine the hitch connection to be sure it is firmly attached

and the safety pin and chains are securely fastened.

• Make sure all trailer lights are still functioning properly.
• Re-examine the contents of your boat to ensure that no

items such as life jackets or other gear have shifted and will
not fly out while you are on the road.

Storage

D-Drive Sec 10_2010:Nautique Ski Sec 10.qxd 7/23/09 4:51 PM Page 10-9

Содержание 100077





































































































































































































































Результаты поиска

Содержание 100077

Отзывы:

CORRECT CRAFT 100077, Руководство пользователя, Страница: 213 / 228

Результаты поиска

Содержание 100077

Отзывы: