CORRECT CRAFT 100077 Скачать руководство пользователя страница 38 | Manualshive

Страница: 38 / 228

CORRECT CRAFT 100077 Скачать руководство пользователя страница 38

1-28

Section 1

Our Environment

As a boater, you already appreciate nature’s beauty and the peace
of the great outdoors. It is a boater’s responsibility to protect the
natural environment by keeping waterways clean.

Foreign Species

If you trailer your boat from lake to lake, you may unknowingly
introduce a foreign aquatic species from one lake to the next.
Thoroughly clean the boat and trailer below the water line, remove
all weeds and algae, and drain the bilge and ballast tanks before
launching the boat in a new body of water.

Fuel/Oil Spillage

The spilling of fuel or oil into our waterways contaminates the
environment and is dangerous to wildlife. DO NOT discharge or
dispose of fuel, oil or other chemicals into the water; it is prohibited
and you can be fined. These are three common, accidental types of
discharge:

• During initial fueling of a nearly empty tank
• Overfilling the fuel tanks
• Pumping contaminated bilge water

Fire or explosion hazard from fumes

accumulating from rags being stored in bilge area. DO
NOT store rags used to wipe up fuel or solvent spills in
the boat. Dispose of rags properly ashore.

!

D-Drive Sec 1_2010:Nautique Ski Sec 1.qxd 7/23/09 4:06 PM Page 1-28

«
...
36
37
38
39
40
...
»

Содержание 100077





































































































































































































































Отзывы:

Нет отзывов