6 of 64
CORRADI S.R.L.
- INSTALLATION MANUAL - PERGOTENDA ® MAESTRO
REV.1 - 11.2019
WALL-MOUNTED CONTROL (BY THE CUSTOMER)
To orient the cover canvas, press the button on the upper or lower
side; when releasing it (neutral central position), the canvas will stop
in the desired position.
REMOTE CONTROL
MAESTRO has a motor with remote control. To open, close, and stop
the blades use the relevant buttons (see figure).
The use of the multi-channel remote control allows checking also
accessories (optional) like lights and side closures.
Replacement of the remote control battery 1
To replace the battery, remove the screw on the rear side of the
remote control and replace it with a similar model (12 Vdc alkaline
battery, mod. 23 AE).
Replacement of the remote control battery 2
This transmitter is supplied by a 3 Volt CR2032 battery. To replace the
battery, open the flap on the rear side, slide out the exhausted battery
and replace it with a new one respecting the polarity. Then fit the flap
in the relevant seat.
Pay attention not to invert the polarity.
Pay attention not to use a wrong model.
Explosion hazard if the battery is replaced with a model other
than the specified one.
Dispose of the used battery in suitable containers.
CONTROLS AND VERSIONS
Canvas closure
DEAD-MAN BUTTON (NOT
SUPPLIED)
Canvas opening
LED
indicates the status
of the battery
(red means “working”)
Canvas closure
Canvas opening
Stop
