28 of 64
CORRADI S.R.L.
- INSTALLATION MANUAL - PERGOTENDA ® MAESTRO
REV.1 - 11.2019
6 TRANSMISSION SHAFT INSTALLATION
Fig. 32 - Sliding block alignment
- Move the runner drive slider against the limit switch (towards the motor) in order to group all
intermediate sliders at limit stop.
Fig. 33 - Shaft installation
- Slide shaft (
A
) into the motor hexagon shaft (
B
);
- if the two shafts do not match (male and female), slightly rotate shaft (
A
) keeping it against the motor
until the first engagement point;
- tighten screw (
B
).
A
B
B
B
