26 of 64
CORRADI S.R.L.
- INSTALLATION MANUAL - PERGOTENDA ® MAESTRO
REV.1 - 11.2019
4 RUNNER INSTALLATION
Fig. 29
- Lift the runners (
A
) until positioning them in the relevant supports (
B
) fixed to the crossbeams (
C
).
Note:
The 4 screws with washers
(D) on the IMPACT runners will allow the following positioning of
the canvas lifting kit and therefore they must be inserted towards the inside of the structure and
slid close to the motor side.
A
A
A
B
C
B
B
B
C
C
Fig. 30
- Position the runners with their ends at 1.5 cm from the motor crossbeam;
- fix the top part of runners (
A
) with plates (
B
) by screwing them with self-drilling screws (
C
). Position
the plates at approximately 1 m from one another.
A
A
1.5 cm.
C
B
D
