background image

SCRN-530 Hardware Installation Guide | DOC-SCRN-530-HIG | 21 July, 2021 | Page 20

16. SFP+ LED Indications

The enhanced small form-factor pluggable has a green Link Status Indicator LED, and 

an unused amber LED. The Link Status Indicator LED has the following operational 

modes:

• Off

No Link (disconnected)

• Solid Green

10 Gbps link has been established

17. Corning Documentation Set

The Corning documentation can be downloaded from the customer support portal 

(the “Corning One Community”) at https://onesupport.corning.com. This site 

requires a login which is available to individuals who have attended Corning Small 

Cell training in the past two years. Email [email protected] to request a login 

if you meet these criteria.

Corning Optical Communications LLC • 4200 Corning Place, Charlotte, NC 28216 USA

800-743-2675 • FAX: 828-325-5060 • International: +1-828-901-5000 • www.corning.com/opcomm

Corning Optical Communications reserves the right to improve, enhance, and modify the features and specifications of Corning Optical Communications products without 

prior notification. A complete listing of the trademarks of Corning Optical Communications is available at www.corning.com/opcomm/trademarks. All other trademarks 

are the properties of their respective owners. 

Corning Optical Communications is ISO 9001 certified. © 2021 Corning Optical Communications. All rights reserved.

Содержание SCRN-530





















Отзывы: