SCRN-530 Hardware Installation Guide | DOC-SCRN-530-HIG | 21 July, 2021 | Page 14
wall, and then it attaches to the ceiling-mount bracket-and-radio node assembly.
Figure 9
shows how the radio node wall-mount bracket attaches to the ceiling-mount
bracket.
Figure 9 Wall-Mount Bracket Attached to the Ceiling-Mount Bracket
Step 1
Using a spirit level, use the wall-mount bracket as a template to mark
securing hole locations.
Step 2
If required, install sheet rock plugs.
Step 3
Attach the wall-mount bracket to the wall. Figure 8 shows the radio
node wall-mount bracket.
Step 4
Seat the ceiling-mount bracket on wall-mount bracket:
- First, attach the ceiling mount bracket to the radio node, than slide
this subassembly into the wall bracket.
- Then, set the radio node to the required tilt, and tighten the wall-
mount bracket captive securing screw to lock the radio node tilt
angle.
