20 | AXYGEN AXYPET PIPETTORS
A: Pipetting pushbutton A1: Pushbutton A2: Knob
B: Adjustment knob
C: Shaft
D: Ejector
F: Shaft nut
G: Piston assembly
H: Spacer
I: O-ring
J: Seal
K: Calibration key
L: Filter
M: Ejector cap
N: Ejector pushbutton
P: Identification ring
S: Locking ring
Please contact Corning Customer Service to inquire about
availability of spare parts. Pipettor model and name of the
part required should be specified.
The replacement of the plunger requires conducting the
calibration procedure according to Section 8.
To find your nearest service center and for scientific
support, visit www.corning.com/lifesciences.
13. Limited Warranty
Corning Incorporated (Corning) warrants that this product
will be free from defects in material and workmanship
for a period of three (3) years from date of purchase.
CORNING DISCLAIMS ALL OTHER WARRANTIES WHETHER
EXPRESSED OR IMPLIED, INCLUDING ANY IMPLIED
WARRANTIES OF MERCHANTABILITY OR OF FITNESS FOR A
PARTICULAR PURPOSE. Corning’s sole obligation shall be to
repair or replace, at its option, any product or part thereof
that proves defective in material or workmanship within
the warranty period, provided the purchaser notifies
Corning of any such defect. Corning is not liable for any
incidental or consequential damages, commercial loss, or
any other damages from the use of this product.
This warranty is valid only if the product is used for its
intended purpose and within the guidelines specified
in the supplied instruction manual. This warranty does
not cover damage caused by accident, neglect, misuse,
improper service, natural forces, or other causes not
arising from defects in original material or workmanship.
This warranty does not cover the PTFE seal, O-ring, or
shaft. Claims for transit damage should be filed with the
transportation carrier.
