background image

Quest Service Manual

© 2004-2014, Cornelius Inc.

- 1 -

Publication Number: 720901117SER

SAFETY INSTRUCTIONS

R

EAD

 

AND

 F

OLLOW

 ALL S

AFETY

 I

NSTRUCTIONS

Safety Overview

•     Read and follow ALL SAFETY INSTRUCTIONS in this manual and any warning/caution labels on the unit (decals, labels or 

laminated cards).

•     Read and understand ALL applicable OSHA (Occupational Safety and Health Administration) safety regulations before 

operating this unit.

Recognition

D

IFFERENT

 T

YPES

 

OF

 A

LERTS

!

DANGER:

Indicates an immediate hazardous situation which if not avoided WILL result in serious injury, death or equipment 
damage.

!

WARNING:

Indicates a potentially hazardous situation which, if not avoided, COULD result in serious injury, death, or equipment 
damage.

CAUTION:

!

Indicates a potentially hazardous situation which, if not avoided, MAY result in minor or moderate injury or equipment 
damage.

S

AFETY

 T

IPS

•     Carefully read and follow all safety messages in this manual and safety signs on the unit.

•     Keep safety signs in good condition and replace missing or damaged items.

•     Learn how to operate the unit and how to use the controls properly.

•     Do not let anyone operate the unit without proper training. This appliance is not intended for use by very young children or 

infirm persons without supervision. Young children should be supervised to ensure that they do not play with the appliance.

•     Keep your unit in proper working condition and do not allow unauthorized modifications to the unit.

Q

UALIFIED

 S

ERVICE

 P

ERSONNEL

!

WARNING:

Only trained and certified electrical, plumbing and refrigeration technicians should service this unit. ALL WIRING AND 
PLUMBING MUST CONFORM TO NATIONAL AND LOCAL CODES. FAILURE TO COMPLY COULD RESULT IN 
SERIOUS INJURY, DEATH OR EQUIPMENT DAMAGE.

Recognize Safety Alerts

This is the safety alert symbol. When you see it in this manual or on the unit, 

be alert to the potential of personal injury or damage to the unit.

!

Содержание Quest NT 4000



























Отзывы: