background image

3

630460070

GENERAL DESCRIPTION

This section gives the Unit description, theory of operation, and design data for

IMPORTANT: 

To the user of this manual – 

This manual is a guide for installing, operating, and main-

taining this equipment. Refer to the Table of Contents for page location for detailed information per-
taining to questions that arise during installation, operation, service, or maintenance of this equip-
ment.

FREIGHT DAMAGE CLAIMS PROCEDURE

The deliver of your equipment (freight company, distributor, or dealer) is responsible for loss or damage of your
shipment. All claims must be filed with the deliverer of your equipment. Please follow the steps below to deter-
mine is your shipment is satisfactory or if a claim must be filed.

1. Check the number of products delivered against the number of products listed on the delivery receipt.

Should the totals not match, have the driver note all error on both copies and both you and the driver sign
and ate said notation.

2. Inspect all cartons for visible damage. Open and inspect as required before the driver leaves and have him

or her note any damage on the receipts. All damaged claims must be inspected within 15 days of delivery.
Notify your carrier immediately if concealed damage is found after delivery.

3. Should concealed damage be found when product is unpacked, retain the packing material and the product

and request an inspection from the deliverer.

4. All claims for loss or damage should be filed at once. Delays in filing will reduce the chance of achieving a

satis factory resolution to the claim.

SPECIFICATIONS, ICE CUBER

The following table contains equipment specification information for the Ice Cubers.

MODEL

IACS224

IACS224E50

IWCS224

IWCS224E50

UNIT

Volts

115

220

115

220

Phase

1

1

1

1

Hertz

60

50

60

50

No. Wires

2+Ground

2+Ground

2+Ground

2+Ground

MIN. CIRCUIT MAX FUSE SIZE (HVAC CIRCUIT BREAKER REQUIRED)

Amps

20

15

20

15

MAX FUSE SIZE (HVAC CIRCUIT BREAKER REQUIRED)

Amps

20

15

15

REFRIGERANT

Type

R404A(HP62)

R404A(HP62)

R404A(HP62)

R404A(HP62)

Weight (oz)

13

13

13

13

Weight (g)

369

369

369

369

COMPRESSOR

Volts

115

220

115

220

Phase

1

1

1

1

Hertz

60

57

60

57

LRA

37.2

16.1

37.2

16.1

RLA

7.1

2.8

7.1

2.8

Содержание IACS224



















Отзывы: