Cornelius FCB Pinnacle 2 Flavor, Руководство по установке

Страница: 6 / 24

FCB Pinnacle 2 and 4 Flavor Installation Manual
Publication Number: 560007295INS - 4 - © 2003-2014, Cornelius Inc.
I
NITIAL
I
NSTALLATION
P
ROCEDURE
NOTE: Tubing, hoses, and cabling come from beneath or in back of the unit. Make a hole in the
counter or wall to accommodate them or allow for no less then 4 inches of clearance behind the
unit and 18 inches above the unit. Ten inches of clearance, behind the unit, is required for filter
removal.
Connect Electrical Power - 50Hz and 60Hz Power
NOTE: Refer to the nameplate for power requirements before connecting electrical power to the
unit.
1. Switch the power to the unit off or remove the fuse to the electrical power circuit breaker.
2. Remove side panel.
3. Feed the power cord through the strain relief either through the bottom or back of the frame, see Figure 2.
and into the power box.
Figure 2.
2. Into the Bottom of
the Power Box
1. Through the
Frame Strain Relief