Cormach LIGRO, Руководство по эксплуатации и обслуживанию

Страница: 35 / 157

34 Operator's manual
Ligro - Ligro GT
Note
Some of the illustrations in this manual
have been taken from photographs of
prototypes; standard production machines
may vary in some respects.
These instructions are for the attention of
personnel with basic mechanics skills. We
have therefore condensed the descriptions
of each operation by omitting detailed
instructions regarding, for example, how
to loosen or tighten the fixing devices
on the machine. Do not attempt to carry
out procedures which exceed your level
of proficiency, or which you do not have
experience with. If in need of assistance,
contact an authorised assistance centre.
TRANSPORT,
STORAGE AND
HANDLING
Equipment transport
conditions
The tyre changer must be transported in
its original packaging and stowed in the
position shown on the packaging itself.
- Packaging dimensions:
- width 800 mm
- depth 1140 mm
- height 970 mm
- Packaging weight:
- STD version
in cardboard 259 Kg
in wood 269 Kg
- GT version ............................................
in cardboard 273 Kg ............................
in wood 283 Kg
INTRODUCTION
The purpose of this manual is to provide
the owner and machine operator with ef-
fective, safe instructions for the operation
and maintenance of the tyre changer.
Following these instructions carefully will
ensure that the machine gives you the
effective
and long-lasting service that
has always distinguished our products,
contributing considerably to making you
job easier.
The following paragraphs define the levels
of danger, associated with the warning cap-
tions found in this manual:
DANGER
Immediate danger, causing serious injury
or death.
WARNING
Danger or unsafe procedures that could
cause serious injury or death.
WARNING
Danger or unsafe procedures that could
cause minor injury or material damage.
Read these instructions carefully before
powering up the equipment. Keep this
manual and all illustrative material sup-
plied with the machine in a folder near
the tyre changer, where it is readily ac-
cessible for consultation by the machine
operator.
The technical documentation supplied is
considered an integral part of the machine;
in the event of sale all relative documenta-
tion must remain with the equipment.
The manual is only to be considered valid
for the machine of the model and serial
number indicated on the nameplate ap-
plied to it.
WARNING
Adhere to the contents of this manual: the
operator will be entirely responsible in the
event of any use of the equipment that is
not specifically described in this manual
.