Cormach GEO 15, Руководство по обслуживанию, Страница: 89 / 102

88
Select
Calibration Check -> Target
Retroprojection
from the upper menu.
In this example Site1 is
selected.
After a while it appears the
Cross Check Info message.
It displays about the target
quality.
A target is good if has the
following numbers:
RedDot: less than 3
BlueDot: less than 15
GreenDot: less than 40
If the target is NOT GOOD it
is required to replace it.
Click on OK.
The left image shows the
ideal target layout (in red)
and the real target (in green).
It is also shown the red-blue-
green dots.
Select the site you want to
check.
GEO 15 Service Manual - Rel. 0 2 0 6 -2016
At the end, set again
the screen resolution
at 800 x 600.