Cormach CM 1200 BB, Руководство по эксплуатации и обслуживанию

Страница: 8 / 49

6
User manual CM 1200 BB
hook it up as shown in fig.2.
This hoisting point must be used whenever you
need to change the installation position of the
machine. Do not attempt to move the machine
until it has been disconnected from the electricity
and compressed air supply systems.
2
INSTALLATION CLEARANCES
WARNING
The installation site must be chosen in strict
compliance with the relevant regulations re-
garding Safety in the workplace.
IMPORTANT:
for correct, safe use of the
equipment, we recommend a lighting level of
at least 300 lux in the place of use.
CAUTION
If the machine is installed outdoors, it must be
properly sheltered under a roof.
WARNING
The floor must be able to withstand a load equal
to the sum of the weight of the equipment itself
and the maximum payload, bearing in mind
the support surface area and eventual anchor
fixtures used.
Install the tyre changer in the chosen work po-
sition, complying with the minimum clearances
shown in fig.3.
The machine must be placed on a horizontal
surface, preferably concrete or tiled. Do not install
on unstable or damaged surfaces.
The surface on which the machine rests must
withstand the loads transmitted during operation.
The surface must have a load-carrying capacity
of at least 500kg/m
2
.
900
1200
500
3
Ambient working conditions
- Relative humidity 30% - 95% without conden-
sation.
- Temperature 0°C - 50°C.
WARNING
Use of the machine in a potentially explosive
atmosphere is not permitted.