Cormach CM 1200 BB, Руководство по эксплуатации и обслуживанию

Страница: 45 / 49

User Manual CM 1200 BB
43
command.
Cylinder leaking air.
• Replace cylinder gaskets.
• Replace cylinder.
WARNING
The “Spare parts” handbook does not authorise
users to carry out work on the machine with the
exception of those operations expressly descri-
bed in the user manual. It only enables users
to provide the technical assistance service with
precise information in order to minimise delays.
WIRING DIAGRAM
Table codes 4-104805A
AP1 Single / two-speed motor circuit board
M1 Motor
SQ1
Two-speed micro-switch
SQ2 Micro-switch (CLOCKWISE rotation)
SQ3 Micro-switch (ANTI-CLOCKWISE rota-
tion)
XB1 Connector
PNEUMATIC SYSTEM
DIAGRAM
Table code 4-106569
A – B - COMMAND FOR BEAD BREAKER
CYLINDER AND PENETRATION CYLINDER FOR
UPPER AND LOWER BEAD BREAKERS
1. Bead breaker cylinder
2. Valve 5/3 NC
3. Silencer filter
4. Valve 3/2 NO
5. Cylinder penetration
C – BEAD BREAKER LOCKING CONTROL
6. Valve 3/2 NC
7. Upper unlocking cylinder
8. Lower unlocking cylinder
D – BEAD BREAKER COLUMN LOCKING
CONTROL
9. Valve 3/2 NC
10. Release cylinder
E - COLUMN TILTING CYLINDER CONTROL
11. Valve 5/2 NO
12. Tilting cylinder
G – INFLATION PEDAL
13. Valve 3/2 NO
14. Pedal
G – COMMAND OF TOOL ARM LOCKING
HANDLE
15. Valve 5/3
16. Vertical lock cylinder
17. Horizontal lock cylinder
18. Tool vertical movement cylinder
26. Adjustment valve
H – INFLATION
I – MANUAL DEFLATION
19. Pressure gauge
20. Manual deflation valve 2/2 NC
L - FILTER REGULATOR UNIT
21. . Female quick coupling
22. Filter regulator unit
23. Lubricator
24. Pressure gauge
25. Control pedal inflation limiter